Serving the San Angelo area  ·  (325) 468-8736  ·  Open Mon-Sun 7am-7pm
📞 (325) 468-8736 Free Quote

Metal Roofing in Carlsbad, TX (76934) · Local Professionals

San Angelo Metal Roofing · Fast response in Carlsbad and the San Angelo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+281Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Carlsbad is a small, open-country community west of San Angelo where the wind hits hard and the hail comes big. Most homes and outbuildings here sit on wide lots with little to block the weather, and the housing stock runs from older rural homes to metal barns and shops that take a beating year after year.

Homeowners in Carlsbad (76934) call San Angelo Metal Roofing because we know how exposed-fastener corrugated panels and metal roofs hold up in this wind corridor. We have worked on plenty of properties along the roads out toward Carlsbad and the surrounding ranch country, and we understand the hail, dust, and sun that wear on roofs here.

Metal Roofing in Carlsbad (76934)

Carlsbad sits in open ranch country west of San Angelo, where properties are spread out and the wind has a clear shot at every roof. The soil is caliche and limestone, and drainage can be tricky after a hard rain, especially on sloped lots or where outbuildings sit on graded pads. Many homes and shops here have exposed-fastener corrugated metal roofs, which are tough but need attention when the screws back out or the washers dry rot. Hail pocks the panels, and the intense sun and dust scour the finish over time. We see a lot of metal roof repair and screw replacement in this area because the wind works on fasteners and seams constantly.

Our team has worked on metal roofs across the San Angelo area, including Carlsbad and the roads out toward Grape Creek and Christoval. We know the local building stock and the kinds of damage that show up after a spring storm.

Our services in Carlsbad

How a Job Works in Carlsbad

Step 1: You call us at (325) 468-8736, and we set up a free on-site assessment. We look at the roof, the fasteners, the flashing, and the drainage, and we give you a straight answer about what needs fixing and what can wait.

Step 2: If you move forward, we schedule the work and pull the permits required by the local building department. On rural properties in Carlsbad, access is usually easy, but we plan for material delivery and staging so we do not tear up your lot. We keep you posted on timing and any weather delays.

Step 3: When the job is done, we clean up the site, haul away old material, and walk the roof with you. We leave your property clean and make sure you know what was done and what to watch for down the road.

Pricing for metal roofing in Carlsbad depends on the size of the roof, the condition of the existing structure, access, and how soon you need it done. For a typical rural home or outbuilding, metal roof installation starts around $8 per square foot, and standing seam runs from $10 per square foot. If you are replacing an old roof, metal roof replacement starts at $9 per square foot, and a retrofit over existing shingles starts at $7 per square foot. Repairs, including leak repair, start at $450, and screw replacement and re-fastening starts at $750. Corrugated and ribbed panel roofing, common on shops and barns here, starts at $5.50 per square foot. We give free estimates, so call (325) 468-8736 to get a real number for your property.

My corrugated metal roof on my place west of Carlsbad has screws backing out and leaking. Can you fix that without replacing the whole roof?
Yes. Exposed-fastener roofs are common on rural properties around Carlsbad, and screw replacement and re-fastening is one of our regular jobs. We replace the old screws and washers with new ones rated for the wind and sun here, check the panels for hail damage, and reseal any trouble spots. If the panels are still sound, a repair can add years to the roof.
A storm just came through Carlsbad and lifted some panels on my barn. How fast can you get out?
We prioritize storm and wind damage calls in the Carlsbad area. Call us at (325) 468-8736, and we will schedule a free inspection as soon as possible. We can tarp or secure the roof to prevent further damage and give you a written estimate for the repair. We also document the damage for insurance if you need it.
What does a metal roof cost for a small rural home in Carlsbad?
For a small home, corrugated panel roofing often starts around $5.50 per square foot, and installation of a standard metal roof starts at $8 per square foot. The final price depends on the roof size, pitch, and whether we are replacing an old roof or installing over existing shingles. Call (325) 468-8736 for a free estimate.
Do I need a permit to replace my roof in Carlsbad?
Roofing permits are commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We always check with the local building department before starting work and handle the permit process for you. If your property is in a special district or has other restrictions, we will let you know what applies.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can adjust gutter and downspout placement to keep water on your property and away from the property line. If there is an HOA or deed restriction, we can review the requirements and coordinate with them. We always respect property lines and work with you to avoid neighbor disputes.
Are you fully insured for roofing work at my Carlsbad property?
Yes. We carry general liability insurance and workers' compensation coverage. We are happy to provide proof of insurance before we start any work on your property.
What kind of maintenance does a metal roof need in Carlsbad's climate?
In this area, the main things to watch are the fasteners and the finish. The sun and dust can dry out washers and back out screws over time, so an annual inspection and tightening of fasteners can prevent leaks. After a hail storm, check for dents and loose panels. We offer free roof inspections to catch small problems before they become big ones.
Why choose us?

Trusted professionals in San Angelo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Angelo

All your work handled by qualified professionals in San Angelo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

281+ Verified Client Reviews in San Angelo

⭐⭐⭐⭐⭐ 4.9/5 · 281 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Angelo · Response within 24h · No commitment · ☎ (325) 468-8736

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Angelo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm