Serving the San Angelo area  ·  (325) 468-8736  ·  Open Mon-Sun 7am-7pm
📞 (325) 468-8736 Free Quote

Metal Roofing in Winters, TX (79567) · Local Professionals

San Angelo Metal Roofing · Fast response in Winters and the San Angelo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+281Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Winters is a small, proud ranching town where the roofs take a beating from the West Texas sun and spring hail. The mix of older wood-frame homes near downtown, brick ranches on the outskirts, and metal barns on farm lots means we see everything from sun-aged shingles to hail-pocked panels. If you live near Winters High School or along Highway 153, you know the drill: a big storm rolls through, and suddenly everyone is looking up at their roof.

That is why homeowners in Winters (79567) call San Angelo Metal Roofing. We are based in San Angelo, just up the road, and we know the local building stock. Whether you are in a 1950s ranch house or a newer place on the edge of town, we can tell you if a metal roof over shingles makes sense or if a full replacement is the better call.

Metal Roofing in Winters (79567)

Winters sits on rolling ranch land with caliche and limestone soils, and the wind out here can be relentless. Many properties have long driveways and tight access for equipment, especially the older farm lots where the house sits back from the road. We plan for that. The soil drains well but flash floods can happen after a hard rain, so we make sure water is directed away from the foundation. Older homes in Winters often have low-pitched roofs with multiple layers of shingles, which can be a candidate for a metal roof over shingles if the structure allows. We check the decking and framing first, because a metal roof is only as good as what is under it.

Our team has worked on roofs across the Concho Valley, from San Angelo to Winters and the surrounding ranch country. We have seen how hail dents and pocks shingles, how UV dries out sealant, and how screws back out over time. That experience helps us recommend the right metal roofing system for your Winters property, whether it is a standing seam roof for a home or corrugated panels for a barn or shop.

Our services in Winters

How a Job Works in Winters

Step 1: You call us at (325) 468-8736 or fill out our contact form. We schedule a free on-site assessment at your Winters property. We will inspect your current roof, take measurements, and talk through your options, including metal roof over shingles, full replacement, or repair. You get a written estimate with clear pricing.

Step 2: Once you approve, we pull the necessary permits with the city or county (requirements vary, so we confirm with the local building department). We order materials and schedule the work. On the day of installation, our crew arrives with everything needed. For properties with tight access, we use smaller equipment or plan for material staging on the driveway or yard. We protect your landscaping and keep the site tidy.

Step 3: After the work is done, we do a thorough cleanup, including a magnet sweep for nails. We walk the roof with you, show you the finished job, and make sure you are satisfied. We do not leave until your property is clean and you have all the paperwork you need for insurance or your records.

Pricing for metal roofing in Winters depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical ranch home, metal roof over shingles (retrofit) starts around $7 per square foot, while a full metal roof replacement starts around $9 per square foot. Standing seam runs about $10 per square foot and up. If you just need repairs, metal roof repair and leak repair start at $450, and screw replacement starts at $750. We give free estimates, so call (325) 468-8736 to get a real number for your property.

My house near downtown Winters has the original shingles from the 1970s. Can you put a metal roof over them?
Possibly. It depends on the number of existing layers and the condition of the decking. Building codes limit how many layers you can have, and we will check that during our free inspection. If the shingles are too far gone or there are already two layers, we may recommend a full tear-off. We will give you an honest assessment and explain both options.
A hailstorm just hit Winters and I think my roof is damaged. How fast can you get out to inspect it?
We offer free storm damage inspections and can usually schedule an assessment within a few days, depending on demand after a storm. Call us at (325) 468-8736 to get on the schedule. We will document any damage for your insurance claim and provide a written estimate for repairs or replacement.
What is the typical cost for a metal roof on a 1,500 square foot home in Winters?
For a 1,500 square foot home, a metal roof over shingles might start around $10,500 (at $7 per square foot), while a full replacement could start around $13,500 (at $9 per square foot). These are ballpark figures. The actual price depends on roof pitch, complexity, material choice, and whether any decking repairs are needed. Call us for a free estimate tailored to your home.
Do I need a permit for a metal roof in Winters, and what does the city require?
Yes, roofing permits are commonly required for a full replacement or re-roof in Winters. The exact requirements, fees, and inspection process vary, so we always confirm with the local building department before starting work. We handle the permitting process for you and make sure the job meets all applicable codes.
My neighbor says my new metal roof might violate HOA rules or property line setbacks. What should I do?
If you are in an HOA, check the covenants first. Some HOAs restrict panel profiles and colors. We can provide material samples and specifications to help you get approval. As for property lines, roofing work generally must stay within your property, but if there is any question about setbacks or easements, we recommend checking your survey or contacting the city. We will work with you to avoid issues.
Are you insured for roofing work on my Winters property?
Yes, we are fully insured with general liability and workers' compensation coverage. You can have peace of mind knowing that your property and our crew are protected.
What maintenance does a metal roof need in Winters to handle the summer heat and dust?
In Winters, the main maintenance items are checking fasteners and sealant. The intense UV and dust can degrade sealant over time, and screws can back out. We recommend an annual inspection, especially after hail season. We can replace screws, reapply sealant, and apply a reflective coating if you want to reduce cooling costs. Call us to schedule a maintenance check.
Why choose us?

Trusted professionals in San Angelo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Angelo

All your work handled by qualified professionals in San Angelo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

281+ Verified Client Reviews in San Angelo

⭐⭐⭐⭐⭐ 4.9/5 · 281 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Angelo · Response within 24h · No commitment · ☎ (325) 468-8736

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Angelo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm