Serving the San Angelo area  ·  (325) 468-8736  ·  Open Mon-Sun 7am-7pm
📞 (325) 468-8736 Free Quote

Metal Roofing in Sterling City, TX (76951) · Local Professionals

San Angelo Metal Roofing · Fast response in Sterling City and the San Angelo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+281Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Sterling City sits right at the edge of the West Texas plains, where the mesquite and cedar give way to open ranch country and the wind never really stops. Most homes here are brick or stone ranch houses from the 1950s through the 1980s, many with low-pitch composition roofs that have taken decades of sun and hail, plus a growing number of metal-roofed barns and shops out on the surrounding ranches.

When Sterling City homeowners in 76951 need a roof that can handle triple-digit summers and spring hailstorms, they call San Angelo Metal Roofing. We know the drive out Highway 163 and the look of these plains-edge properties, and we bring the same straight talk and careful workmanship to every job, whether it is a house near Sterling City School or a ranch building off FM 2212.

Metal Roofing in Sterling City (76951)

Sterling City properties come with their own set of challenges. The ground here is caliche and limestone, which can be hard to dig and slow to drain after a hard rain, so we pay close attention to how water sheds off the roof and away from the foundation. Many homes sit on larger lots with plenty of room for staging, but some of the older places closer to downtown have tighter access and mature trees that drop limbs, so we plan each job around the actual site. The intense UV and constant wind mean fasteners and sealants take a beating, and hail can dent even sturdy panels if they are not installed with the right gauge and underlayment. We have seen it all across the Concho Valley, from simple corrugated panel roofs on shops to standing seam on new homes, and we bring that experience to every Sterling City project.

Our team has been serving Sterling City and the surrounding San Angelo area for years, and we understand the local building stock, the weather patterns, and the permits required. We are fully insured with general liability and workers' compensation, so you can have peace of mind while we work.

Our services in Sterling City

How a Job Works in Sterling City

Step 1: It starts with a call to (325) 468-8736 or a request through our website. We schedule a free on-site assessment at your Sterling City property, where we inspect the roof, check for leaks, hail damage, and worn fasteners, and talk through your options. You get a clear written estimate with no pressure and no surprises.

Step 2: Once you approve, we pull the necessary permits with the City of Sterling City (requirements vary, so we verify with the local building department) and schedule the work. On the day of the job, our crew arrives with materials and equipment, protects your landscaping, and gets to work. For a metal roof replacement, we remove the old roofing, inspect and repair the decking, and install the new metal roof with proper underlayment and flashing. Most residential jobs take a few days, depending on weather and complexity.

Step 3: After the install, we do a thorough cleanup, haul away all debris, and walk the property with you to make sure you are satisfied. We do not leave until the site is clean and you have a clear understanding of the new roof and its warranty.

Pricing for metal roofing in Sterling City depends on the size and pitch of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and coating or painting starts at $2.50 per square foot. For a typical 2,000 square foot ranch home, a full replacement might run between $14,000 and $22,000 depending on the panel type and any decking repairs. We always provide a free estimate so you know exactly what to expect. Call (325) 468-8736 to schedule yours.

My house is near Sterling City School and has an old shingle roof that hails have chewed up. Can you match the look of the neighborhood with a metal roof?
Yes. We install metal shingle and stone-coated steel roofing that mimics the look of traditional shingles or tiles while giving you the durability of metal. We can bring samples so you can see how different profiles and colors look against the brick or stone of your home, and we will help you choose something that fits the character of the neighborhood.
A storm just blew through Sterling City and lifted some panels on my barn. How fast can you get out to make repairs?
We offer free inspections for storm and wind damage and prioritize emergency repairs. Call us at (325) 468-8736 and we will schedule a visit as soon as possible, usually within a day or two depending on demand. We can secure the roof to prevent further damage and provide a written estimate for permanent repairs.
What does a metal roof replacement cost for a typical three-bedroom ranch house in Sterling City?
For a 1,500 to 2,000 square foot ranch home, a full metal roof replacement typically ranges from $12,000 to $20,000, depending on the panel type, roof complexity, and whether any decking needs repair. Standing seam and stone-coated steel are at the higher end, while corrugated or ribbed panels are more economical. We provide a detailed free estimate after inspecting your roof.
Do I need a permit to replace my roof in Sterling City, and how do I get one?
Roofing permits are commonly required for a full replacement or re-roof, and the requirements vary by jurisdiction. We handle the permit process for you, including submitting plans and coordinating inspections with the City of Sterling City. We always verify current rules with the local building department before starting work.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We design roof drainage to keep water on your property, using gutters and downspouts that direct flow away from the property line. If there is an HOA, we can help you get approval for the panel profile and color. For property line concerns, we recommend talking with your neighbor and reviewing your survey before work begins, and we are happy to adjust the plan to avoid disputes.
Are you fully insured for roofing work in Sterling City?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance upon request so you can verify our coverage before we start any work on your property.
What kind of maintenance does a metal roof need in Sterling City's climate?
In our area, the main maintenance items are checking and replacing fasteners that may have loosened from wind or thermal movement, and cleaning out gutters and valleys where debris can collect. We recommend an annual inspection, especially after hail season, to catch small issues before they become leaks. We offer maintenance plans and can also apply a protective coating to extend the life of your roof.
Why choose us?

Trusted professionals in San Angelo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Angelo

All your work handled by qualified professionals in San Angelo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

281+ Verified Client Reviews in San Angelo

⭐⭐⭐⭐⭐ 4.9/5 · 281 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Angelo · Response within 24h · No commitment · ☎ (325) 468-8736

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Angelo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm