Serving the San Angelo area  ·  (325) 468-8736  ·  Open Mon-Sun 7am-7pm
📞 (325) 468-8736 Free Quote

Metal Roofing in Eden, TX (76837) · Local Professionals

San Angelo Metal Roofing · Fast response in Eden and the San Angelo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+281Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Eden is a small ranch town where homes and farm buildings sit wide open to whatever the sky sends, from hail the size of golf balls to triple-digit sun that never lets up. The housing stock here is a mix of older ranch houses, modest brick homes, and working agricultural buildings on good-sized lots, many of them with low-pitched roofs that have taken a beating for decades. If you live off Main Street or out toward the river, you know the wind can peel a shingle back before you even hear thunder.

That is why folks in Eden (76837) call San Angelo Metal Roofing. We understand how metal performs in open Concho Valley country, where there is no tree line to break the wind and no shade to slow the UV. Whether you are in town near the Eden school or out on a ranch road, we bring the same straightforward approach: inspect it, explain it, fix it right.

Metal Roofing in Eden (76837)

Eden sits in Concho County on ground that is a mix of caliche, limestone, and sandy loam, and that matters for roofing. Caliche holds water hard after a rain, so proper grading and drainage around your foundation is part of the conversation, not an afterthought. Lots here tend to be larger than in San Angelo, which usually helps with access, but ranch properties can mean long driveways, gates, and equipment that needs to get close to the building. Agricultural buildings, barns, and shops often have broad, low-slope roofs where panel selection and fastener placement make the difference between a roof that lasts and one that leaks at every screw.

Our team has worked across the San Angelo area and out into towns like Eden long enough to know the failure patterns. Screws back out from vibration and wind, seams separate after a hard blow, and hail dents or cracks panels that were not rated for it. We install standing seam, corrugated and ribbed panels, stone-coated steel, and metal shingle systems, and we repair the leaks that come from flashing gaps and failed fasteners. We are fully insured with general liability and workers' compensation, and we treat every Eden property like it is our own.

Our services in Eden

How a Job Works in Eden

Step 1 is a free on-site assessment. You call (325) 468-8736, we set a time that works, and we walk the roof and the property with you. On a ranch or farm building, that means looking at the panels, the fasteners, the flashing, and how water actually leaves the roof. We give you a written estimate and a straight explanation of what we found, no pressure and no vague numbers.

Step 2 is the work itself. In Eden, that often means coordinating around weather windows, because spring supercells can roll in fast and we do not leave an open roof exposed. If your property is inside the city limits, we confirm permit requirements with the city before we start, since thresholds and inspection rules vary. For larger agricultural buildings, we plan material delivery and staging so we are not blocking your equipment or your animals. We protect landscaping and keep the site as tidy as the work allows.

Step 3 is cleanup and a final walkthrough. We magnet-sweep for nails, haul off old material, and walk the finished roof with you so you can see the seams, the flashing, and the fasteners yourself. We do not consider the job done until you are satisfied and the property is clean.

Pricing in Eden depends on the job, but here are realistic starting points. Metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, which is often the practical choice for barns and shops, while stone-coated steel and metal shingles start at $9. Repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Metal roof coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. The main cost factors are roof size and pitch, how many layers you are removing or going over, access and drive time, the condition of the deck and flashing, and urgency if a storm has opened something up. Call (325) 468-8736 for a free estimate and a real number for your property.

My ranch shop outside Eden has a low-slope metal roof with screws backing out. Can you re-fasten it without replacing the panels?
Yes, in most cases. Screw replacement and re-fastening starts at $750, and we inspect the panels first to see whether the holes have elongated or the washers have failed. If the panels are still sound, we replace the fasteners with the correct screws and washers for the panel profile and check the flashing while we are up there. If the metal is cracked or the seams are separating, we will tell you honestly whether a repair or a replacement makes more sense.
A storm just peeled back part of my roof in Eden. How fast can you get out?
We offer free storm and wind damage inspections, and we prioritize active leaks and lifted panels because every hour of exposure makes things worse. Call (325) 468-8736 and describe what you are seeing. We will schedule the inspection, document the damage for your insurance if you are filing a claim, and make temporary repairs if needed to keep water out until the permanent fix is done.
What does a typical metal roof replacement cost for a home in Eden?
Metal roof replacement starts at $9 per square foot, so a typical single-story ranch home here often lands in a range that reflects its size, pitch, and how much old material has to come off. Installation starts at $8 per square foot and standing seam at $10. The biggest variables are square footage, roof complexity, whether we are going over existing shingles or tearing off, and the panel type you choose. We give you a written estimate after a free inspection, so the number is based on your actual roof, not a guess.
Do I need a permit to replace my roof in Eden, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, but the thresholds, fees, and inspection requirements vary by jurisdiction, so we confirm the current rules with the City of Eden before work begins. We can walk you through what the city will require for your address and make sure the job is set up to pass inspection. If your property is outside the city limits in Concho County, the requirements can differ, so we check that too.
What if my neighbor says my new metal roof changes the look of the neighborhood, or my HOA has rules?
If you are in an HOA or a deed-restricted area, we help you get the panel profile and color approved before we order material, because changing it after the fact is expensive. On property lines, the roof itself rarely crosses the line, but gutters, drainage, and runoff can become a neighbor issue. We set gutters and downspouts so water discharges on your own property, and we will flag anything that looks like it needs a survey or a conversation with your neighbor before we build.
Are you insured for work on my Eden property?
Yes. We are fully insured with general liability and workers' compensation coverage. That protects you if something is damaged during the job and covers our crew if anyone is hurt on your property. We are happy to provide proof of insurance before we start, and we recommend asking any contractor for it before they set foot on your roof.
What maintenance should I do on a metal roof in Eden between storms?
The main thing in this climate is fasteners and debris. Have the roof inspected once a year, ideally in early spring before hail season, and after any big storm. We check for backed-out screws, worn washers, lifted panels, and flashing gaps, and we clear leaves and limbs from valleys and gutters. Coating and painting starting at $2.50 per square foot can extend the life of an older panel roof and cut the UV wear. A free inspection is the easiest way to catch a small problem before it becomes a leak.
Why choose us?

Trusted professionals in San Angelo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Angelo

All your work handled by qualified professionals in San Angelo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

281+ Verified Client Reviews in San Angelo

⭐⭐⭐⭐⭐ 4.9/5 · 281 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Angelo · Response within 24h · No commitment · ☎ (325) 468-8736

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Angelo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm