Serving the San Angelo area  ·  (325) 468-8736  ·  Open Mon-Sun 7am-7pm
📞 (325) 468-8736 Free Quote

Metal Roofing in Robert Lee, TX (76945) · Local Professionals

San Angelo Metal Roofing · Fast response in Robert Lee and the San Angelo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+281Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Robert Lee sits right where the Concho Valley opens up toward the Colorado River country, and the mix of lake cottages, brick ranch homes, and working ranch buildings here takes a beating from West Texas wind and summer sun. If you live off Highway 158 or near the Robert Lee Lake area, you already know that a roof has to do more than look good. It has to hold tight when the spring supercells roll through and stand up to triple-digit heat year after year.

That is why folks in Robert Lee (76945) call San Angelo Metal Roofing. We are based in San Angelo, we know the caliche and limestone ground out here, and we have put metal on everything from in-town homes near the school to barns and shops out on the ranches. We are fully insured and we show up when we say we will.

Metal Roofing in Robert Lee (76945)

Robert Lee is a small town with a big range of roof types. In town you have older brick and stone homes, some of them built mid-century with low-pitch shingle roofs that are now at the end of their life. Around the lake you have cottages and cabins that catch every bit of wind coming off the water. And out on the ranches and acreage spreads, you have metal barns, shops, and homes that need panels that can handle hail, dust, and the occasional hard freeze. The ground here is caliche and limestone, which means drainage can be tricky after a hard rain, and we pay attention to how water sheds off the roof and away from the foundation.

Our team has worked all over Tom Green County and the surrounding areas, including Robert Lee. We know the difference between a lake cottage roof and a ranch shop roof, and we bring the right panels, fasteners, and flashing for each job. Whether it is a standing seam roof on a new build or a retrofit over old shingles, we have done it here and we know what holds up.

Our services in Robert Lee

How a Job Works in Robert Lee

Step 1: You call us at (325) 468-8736 or fill out the form, and we set up a free on-site assessment. We look at the roof, the decking, the flashing, and the access, and we talk with you about what you want. You get a written estimate, no pressure.

Step 2: Once you approve, we schedule the work. In Robert Lee, that might mean coordinating with the city for a permit if it is a full replacement, or working around tight access on a smaller lot. We handle the details and keep you posted on timing.

Step 3: When we finish, we clean up the site, haul away old materials, and walk the roof with you. We make sure you know what we did and that you are satisfied before we leave.

Pricing for metal roofing in Robert Lee depends on the size of the roof, the condition of the decking, the pitch, and the access. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10, and replacement starts at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. We also offer coatings, gutters, and snow guards. For a free estimate tailored to your property, call us at (325) 468-8736.

Do you work on lake cottages around Robert Lee Lake?
Yes, we do. Lake cottages often have low-pitch roofs and take a lot of wind and sun, so we usually recommend standing seam or a quality corrugated panel with proper fasteners. We can assess your cottage and give you options that fit the budget.
How fast can you respond to storm damage in Robert Lee?
We offer free inspections for storm and wind damage. Call us at (325) 468-8736 and we will schedule a visit as soon as possible, especially if there is an active leak.
What does a metal roof cost for a typical Robert Lee home?
Most homes fall in the $8 to $12 per square foot range for installation, depending on the panel type and roof complexity. A free estimate will give you an exact number.
Do I need a permit for a metal roof in Robert Lee?
Permits are commonly required for a full replacement or re-roof, and requirements vary by jurisdiction. We will check with the local building department and handle the paperwork for you.
What if my neighbor's tree hangs over my roof or there is an HOA rule?
We can help you understand property line issues and work with HOA design review if needed. Just let us know before we start.
Are you insured for work at my Robert Lee property?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide proof of insurance upon request.
How often should I have my metal roof inspected in Robert Lee?
We recommend an inspection every two to three years, especially after hail season. We check fasteners, seams, and flashing to catch small issues before they become leaks.
Why choose us?

Trusted professionals in San Angelo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Angelo

All your work handled by qualified professionals in San Angelo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

281+ Verified Client Reviews in San Angelo

⭐⭐⭐⭐⭐ 4.9/5 · 281 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Angelo · Response within 24h · No commitment · ☎ (325) 468-8736

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Angelo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm