Serving the San Angelo area  ·  (325) 468-8736  ·  Open Mon-Sun 7am-7pm
📞 (325) 468-8736 Free Quote

Metal Roofing in Grape Creek, TX (76901) · Local Professionals

San Angelo Metal Roofing · Fast response in Grape Creek and the San Angelo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+281Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Grape Creek is ranch country north of San Angelo, where caliche roads, wide lots, and a mix of brick ranchettes, metal shops, and barns define the landscape. Homes here take a beating from West Texas hail, triple-digit summers, and dust-driven wind, so a roof has to be more than shingles and hope.

We are San Angelo Metal Roofing, and we serve Grape Creek (76901) because we know the difference between a city roof and a rural one. From the ranchettes off Grape Creek Road to the newer places sprouting toward the Concho Valley, we install, repair, and replace metal roofs built for this climate.

Metal Roofing in Grape Creek (76901)

Grape Creek sits on limestone and caliche soil that shifts with the seasons, and many properties here are on grade or have long driveways that make access a real part of the job. You see a lot of brick and stone ranchettes with low-pitch roofs, metal barns and shops that need to shed heat, and the occasional older home with a roof that has seen too many hailstorms. The open country means wind gets a clean run at exposed fasteners and panel edges, and the intense UV dries out sealants and scours finishes faster than in town. We plan for that with proper fastener selection, wind-rated panels, and detailing that keeps water moving away from the structure.

Our team has worked across Tom Green County, from the lake cottages at Nasworthy to the ranchettes spreading toward Grape Creek, Christoval, and Wall. We understand how hail pocks shingles, how ice dams can form at eaves on higher-elevation homes, and why a metal roof over shingles often makes sense for a shop or barn. We bring that experience to every Grape Creek job, whether it is a standing seam roof on a ranch house or a corrugated panel replacement on a hay barn.

Our services in Grape Creek

How a Job Works in Grape Creek

Step 1: You call us at (325) 468-8736 or request a free estimate online. We schedule an on-site assessment at your Grape Creek property, inspect the existing roof, check the deck and flashing, and talk through your options. You get a clear written estimate with no pressure and no surprises.

Step 2: Once you approve, we pull the required permits with the local building department (rules vary by jurisdiction, so we verify everything first). On install day, our crew arrives with materials and equipment suited for rural access, whether that means a long driveway, tight turnaround, or a shop that needs ventilation detailing. We protect landscaping, keep the site organized, and coordinate with any HOA or historic review if your property falls under one.

Step 3: When the work is done, we walk the roof, clean up nails and debris with a magnet sweep, and do a final walkthrough with you. We leave your property clean and your roof ready for the next West Texas storm.

Pricing for metal roofing in Grape Creek depends on the size of the roof, access, condition of the deck, and the type of metal you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal over shingles (retrofit) at $7. Corrugated and ribbed panel roofing starts at $5.50, while stone-coated steel and metal shingle roofing start at $9. For repairs, metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing, chimney, and skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Commercial and agricultural metal roofing is quoted with a free estimate. Call (325) 468-8736 for a free, no-obligation estimate tailored to your Grape Creek property.

My Grape Creek ranchette has a low-pitch roof and I get water pooling near the eaves after hard rain. What metal roofing options work best?
Low-slope roofs are common on ranchettes and shops out here, and standing seam or corrugated panels with proper underlayment and eave detailing handle water better than shingles. We assess your pitch and drainage, then recommend a panel profile and flashing that move water away from the structure. A free inspection at (325) 468-8736 will tell you what you need.
A storm just peeled back panels on my barn off Grape Creek Road. How fast can you respond for emergency repairs?
We prioritize storm and wind damage calls in Grape Creek and the surrounding area. Call (325) 468-8736 and we will schedule an inspection as soon as possible, often the same day or next. We can secure the roof, document damage for insurance, and give you a repair plan.
What does a typical metal roof replacement cost for a 2,000-square-foot home in Grape Creek?
For a 2,000-square-foot home, replacement typically starts around $9 per square foot, so you might see $18,000 and up depending on panel type, deck condition, and access. Standing seam runs higher, starting at $10 per square foot. We give free estimates at (325) 468-8736 so you get a real number for your property.
Do I need a permit to replace my roof in Grape Creek, and who handles it?
Roofing permits are commonly required for full replacement or re-roof, and thresholds and fees vary by jurisdiction. We verify the requirements with the local building department before starting and handle the permit process for you. Rules can change, so we always confirm before work begins.
My neighbor and I share a property line, and my new metal roof will overhang slightly. Do I need to worry about HOA approval or a boundary issue?
Property line overhangs can be a concern, and if you are in an HOA, design review may restrict panel profile and color. We help you check setbacks and coordinate with your HOA. For boundary questions, we recommend confirming with your neighbor and the local building department. We can provide documentation for HOA submissions.
Are you fully insured for roofing work at my Grape Creek property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Grape Creek to survive hail and summer heat?
Inspect fasteners and sealant annually, especially after hail season, and check for loose panels or lifted edges. Coating can extend the life of older panels and improve UV resistance. We offer free inspections and maintenance plans at (325) 468-8736 to keep your roof ready for the next storm.
Why choose us?

Trusted professionals in San Angelo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Angelo

All your work handled by qualified professionals in San Angelo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

281+ Verified Client Reviews in San Angelo

⭐⭐⭐⭐⭐ 4.9/5 · 281 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Angelo · Response within 24h · No commitment · ☎ (325) 468-8736

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Angelo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm