Serving the San Angelo area  ·  (325) 468-8736  ·  Open Mon-Sun 7am-7pm
📞 (325) 468-8736 Free Quote

Metal Roofing in Miles, TX (76861) · Local Professionals

San Angelo Metal Roofing · Fast response in Miles and the San Angelo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+281Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Miles is a small town where the wind comes off open farm country and hits your roof square on. Most homes here are modest ranch houses and older farmsteads with low-pitch shingle roofs, plus a fair number of metal barns and shops on larger lots. The hail and wind out here do not mess around, and that is why so many folks in 76861 are switching to metal.

We are San Angelo Metal Roofing, and we serve Miles from just up the road in San Angelo. If you have driven past the old Miles school or the cotton gin on the highway, you have seen the kind of buildings we work on. We know how hail pits shingles and how wind peels panels, and we fix both without a bunch of sales talk.

Metal Roofing in Miles (76861)

Miles sits on flat to gently rolling farm ground with caliche and limestone close to the surface, so drainage is usually more about how water sheets off a low slope than about steep grade. The bigger challenge is wind exposure. There is not much to break it up between here and the fields, and that means fasteners and seams take a beating. We see a lot of older shingle roofs on ranch homes and farmhouses that have been patched a dozen times, and we see metal barns and shops where screw gaskets have dried out and backed out after years of sun and dust. Our team knows how to spec panels and fasteners for that kind of open-country wind, and we pay attention to flashing at chimneys and lean-tos because that is where leaks start.

We have been working in Miles and around San Angelo for years, from the homes near the downtown blocks to the ranchettes out toward the highway. When we give an estimate, it is based on what we actually see on your roof, not a guess from the driveway.

Our services in Miles

How a Job Works in Miles

Step 1: You call us at (325) 468-8736 or send a message, and we set up a free on-site assessment. We walk the roof, check the fasteners, seams, and flashing, and look at the decking where we can. Then we give you a written estimate with options, whether that is a repair, a replacement, or a retrofit over your existing shingles.

Step 2: Once you approve, we schedule the work and pull the permits that apply in Miles. We keep the crew and the dumpster as tight to the house as your lot allows, and we protect landscaping and walkways. If your property is on a smaller in-town lot, we plan material drops so we are not blocking the alley or the neighbor's drive. We also coordinate with your insurance adjuster if it is a storm claim, and we document the damage with photos.

Step 3: When the job is done, we magnet-sweep the yard for nails, haul off all debris, and walk the roof and gutters with you. We do not leave until you have seen the finished work and know what to expect down the road.

Pricing in Miles depends on the size and pitch of your roof, how many layers are already there, and how accessible the property is. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. A metal roof replacement starts at $9 per square foot, and a retrofit over existing shingles starts at $7 per square foot. Repairs and leak repairs start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, and skylight work starts at $600. Storm and wind damage inspections are free. The best way to get a real number for your place is to call us at (325) 468-8736 and set up a free estimate.

My farmhouse outside Miles has an old shingle roof that hails keep pocking. Is it worth switching to metal?
In most cases, yes. Shingles take a beating in open farm country, and once they start pitting and losing granules, you are patching every couple of years. A metal roof handles hail better and sheds the heat, and for a lot of Miles homeowners the long-term cost is lower. We can look at your existing roof and tell you whether a retrofit over the shingles makes sense or if a full replacement is the better call.
A storm just peeled back some panels on my barn. How fast can you get out to Miles?
We treat wind damage as a priority because an open roof leads to bigger problems fast. Call us at (325) 468-8736, and we will get an inspection scheduled as soon as we can, often the same day or next day depending on the weather. We can tarp or secure the area if needed and give you a repair estimate on the spot.
What does a typical metal roof replacement cost for a home in Miles?
Most replacements in Miles land somewhere between the low thousands and the mid teens depending on square footage, roof pitch, and whether we are removing one layer or more. Our published starting rates are $9 per square foot for replacement and $10 per square foot for standing seam. Call (325) 468-8736 and we will give you a free estimate for your exact roof.
Do I need a permit from the City of Miles to replace my roof?
Permit rules vary by jurisdiction, and it is always best to check with the City of Miles building department before work starts. In many cases a full replacement or re-roof requires a permit, and inspection requirements can differ. We are glad to help you sort out what applies to your address, and we will not start until the paperwork is straight.
My neighbor and I are not sure where the property line is, and my new roof panels will be close to it. What do we do?
It is common on older Miles lots for the line to be a little fuzzy. We recommend having a survey done if there is any question, and we can adjust the layout so the work stays on your side. If you are in an HOA, we can also help you submit the panel profile and color for approval before we order materials.
Are you insured for work on my property in Miles?
Yes. We carry general liability insurance and workers' compensation coverage.
What should I do to maintain a metal roof in Miles between hail seasons?
The main thing is to check the fasteners and gaskets once a year, especially after a big wind or hail event. Sun and dust dry out the washers, and a loose screw is the first step toward a leak. We offer screw replacement and re-fastening starting at $750, and a free inspection is the easiest way to catch small issues before they turn into a repair bill.
Why choose us?

Trusted professionals in San Angelo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Angelo

All your work handled by qualified professionals in San Angelo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

281+ Verified Client Reviews in San Angelo

⭐⭐⭐⭐⭐ 4.9/5 · 281 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Angelo · Response within 24h · No commitment · ☎ (325) 468-8736

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Angelo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm